Skip to content

edgeSentinel · On-site predictive maintenance · Industrial SMEs

Act now, plan or wait? We run the numbers.

edgeSentinel estimates the probability that a piece of equipment crosses its failure threshold before your intervention lead time, then recommends the least costly action. The calculation runs inside the plant. You keep the decision.

PUMP P-12 · MOTOR CURRENT AND PRESSUREillustrative example
Health curve of pump P-12, illustrative exampleThe equipment's health declines over time. Today's measurement sits above the failure threshold; the forecast, with its uncertainty band, crosses it before the intervention lead time. The orange area represents the probability of failure before that lead time.healthfailure thresholdTodayLead timereadingp = 77%time →

This is the probability edgeSentinel then estimates from your measurements.

  • Wait
    0.77 × €20,000 + €0
    €15,400
  • PlanRecommended
    0.15 × 0.77 × €20,000 + €2,50015%: residual risk before the planned date
    €4,810
  • Act now
    immediate stop · €5,200
    €5,200

Fictitious amounts: replace them with your own.

wait → plan from 14.7% · act now from 90%The operator decides.

See · Understand · Decide · Act

  1. See

    Your equipment measured continuously, on site.

    descriptive

  2. Understand

    What is degrading, and why.

    diagnostic

  3. Decide

    Act now, plan or wait: every option costed.

    predictive + prescriptive

  4. Act

    You intervene; field feedback recalibrates the model.

    feedback loop

VOLT method · the pilot in 30 days

We design backwards.

Most projects start by installing sensors. We start with the decision you have to make — and we only measure what serves that decision.

  1. Visit & scope

    We start from the decision: your options, their costs and your intervention lead time, for 3 to 5 critical assets. Success criteria written and signed.

  2. Open the data

    A box on site, read-only collection (Modbus, OPC-UA, MQTT). Nothing is changed in your PLCs.

  3. Log & cost

    Downtime, OEE and energy on screen, alerts, and the cost of each option for your critical assets.

  4. Train & hand over

    Hardening, documentation, training for two people, costed review on day 30.

Then edgeSentinel runs continuously: see, understand, decide, act.

Decision engine

Expected cost = probability × cost of failure + cost of the action

To plan, the probability is reduced to the residual risk before the intervention date.

We recommend the cheapest action. The operator decides.

See the method

Services

One platform, several uses.

The same on-site box and the same decision logic, extended step by step.

Next, on the same box: voice-dictated findings, end-of-line quality control.

Offer

We prove the value before deploying.

  1. 00

    Intro call

    Free · 20 min

    Tell us which line costs you the most downtime; we check whether the calculation pays off.

  2. 01

    Flash Diagnostic

    €1,500 excl. VAT · 3 days over 2 weeks

    The decisions that cost you, the data already available, what is missing. Deducted from the pilot if it is signed within 60 days. Not invoiced if the report contains fewer than 3 actionable items.

  3. 02

    VOLT Pilot

    €6,000 excl. VAT + hardware at cost · 30 days

    One line measured, its downtime costed, the cost of each option. The final payment depends on the criteria signed at the start.

  4. 03

    edgeSentinel subscription

    Per monitored asset · priced at the end of the pilot

    Exit without penalty at 3 months if fewer than 70% of alerts are confirmed in the field. Monthly after that, extended line by line. No vendor lock-in.

Who does the work

An engineer who speaks both PLC and IT.

I am Daniel-Ange Horanimana, founder of Gikoris. An electrical engineer, I worked in a highly regulated nuclear environment (Framatome, EPR Flamanville 3), then deployed cloud platforms in production (Amazon EKS, Terraform, Argo CD). I carry out every diagnostic and every pilot myself, supported by Cap Services, a business and employment cooperative based in Lyon.

  • EDGE

    On-site processing. Raw signals are analysed right next to the machines.

  • FLOW

    You choose what leaves. Only the indicators you authorise leave the site.

  • OT

    Read-only. No command is ever sent to your PLCs.

Frequently asked questions

How much does it cost?

The Flash Diagnostic costs €1,500 excl. VAT, deducted from the pilot if it is signed within 60 days. The pilot costs €6,000 excl. VAT, plus hardware at cost. The subscription is then billed per monitored asset, priced at the end of the pilot.

Do we need new sensors? Are our PLCs compatible?

Not necessarily. edgeSentinel first reads the signals already present in your PLCs (Siemens, Schneider, Rockwell…), read-only. It uses Modbus, OPC-UA (Open Platform Communications Unified Architecture), MQTT (Message Queuing Telemetry Transport) or SunSpec, with a gateway if needed, including on older machines. If a signal useful to a decision is missing, the diagnostic tells you which one to add and why.

How long does a pilot last?

30 days, from installation to the costed review, then 30 days of support. The accuracy of the predictions is then validated over 3 months, as part of the subscription.

What if the pilot delivers nothing?

Success criteria are written and signed at the start. The final payment (30%) is only due if they are met.

What if we stop the subscription?

During the first 3 months, you can stop without penalty if fewer than 70% of alerts are confirmed in the field; after that, the subscription is monthly. If you stop, collection and storage keep running: you keep your data and its history, readable by the tool of your choice. Dashboards, alerts and recommendations stop, as do updates and support.

How much of our teams' time does it take?

About 3 person-days, spread over the 30 days: scoping, site access, cost validation, training (1 day) and the final review.

Where is our data processed?

Processing happens on site, inside your plant. You then choose what leaves it — for example a summary sent to your CMMS (computerised maintenance management system). See the Security and sovereignty page for the details of the measures in place.

If the Internet connection goes down, the calculation keeps running on site; only outbound exchanges wait for it to come back.

Who makes the final decision?

The operator. edgeSentinel calculates the expected cost of waiting, planning or intervening, and recommends the least costly option. The decision to act stays in your team’s hands.

Is there any public funding?

The Flash Diagnostic is not subsidised. For a broader AI (artificial intelligence) diagnostic, Bpifrance offers the Diag Data IA: 8 days, €10,000 excl. VAT, 40% of which is covered. Source, in French: les-aides.fr.

Which decision costs you the most today?

20 minutes, free. Tell us which line costs you the most downtime: together we check whether the calculation pays off.

Talk about your line